How to fix the bottom of a pool

How to fix the bottom of a pool. It is very common for vinyl pools develop leaks in the background. It would take something too strong to crack a concrete pool, while a vinyl tarp eventually dries, becomes brittle and is more susceptible to cracking. Unlike concrete pools, finding a leak in a vinyl pool can be a difficult task.

Instructions

How to tell if you have a leak

1. Add water constantly to the pool is a good indicator that you have a leak. A good parameter to consider is that if you need to add 2 inches (5 cm) or more per week, you probably have a leak.

2. Determine if your loss is an area other than the bottom of the pool. If it leaks only when the system is running, probably indicates a leak in the plumbing. However, if the leak is continuous, it will most likely be in the background.

3. Walk around your pool and looking soft and wet areas on the floor or around the areas where the grass is greener on the other areas. Any of these may indicate a leak.

4. Check the inside of your pool for any cracks or sinks that could have been formed by water loss. Pay close attention to the corners and around the stairs near where the coating is put have narrowed areas and have small leaks.

5. Look near the water line. If you live in a cold climate, the spring thaw can cause a cut in the lining. It could also happen that an animal has fallen in the pool, scratching the walls.

6. Wear a mask and snorkel to find leaks in the bottom. There may be small air bubbles from the leak. Or, since any leaks come from dirt from the hole you should be viewed.

Fixing the pool's leak

1. Once you've found the leak, it's easy to plug them cutting or dividing a patch to make it a couple of inches or so a small hole to coat the lining.

2. Buy a kit of patches in your pool supply store. This kit contains a piece of vinyl siding and plastic cement works under or above water.

3. Cut a patch to plug the hole, scraping the back with sandpaper, then spread cement over the patch and place it over the hole (even underwater).

4. Alisa air bubbles and allow the cement to adhere.

5. Alternatively, you can use a sealant of a nitrile rubber base, available in some pool supply stores. With this product, simply spread the sealer over vinyl leaks without even using a patch. Even you can use it under water and seal small cuts in the coating. As an added bonus, it often comes out in a blue color to the color of the pool draw.

Tips and Warnings

• You're not sure of the amount of water your pool is lost to evaporation or if you have a leak? Fill a bucket with water and mark the level. Mark the water level of your pool and leaves the nature next to the pool for a day. If you have a leak, the levels should have been equal. If the pool water is not reduced more than the bucket, you have a leak.
• Small leaks under water can be difficult to detect. Use food coloring or chemical phenol red in your water test kit. You must put a jet dye near where you suspect there is a hole and if there is, you will see the color closer to him.
• You can build your own kit of patches . For a dollar or two, most pool supply stores sell the remains or pieces of carpet installed. Vinyl Cement Patch is also easily found in the same store. That's all, and for less than $ 5 have a repair kit (and can even match the pattern canvas your own pool).
• If you find that you have a leak in the liner of the pool and not drain the water. A vinyl liner is held in place by the pressure of water in the pool. If you take away the water, the coating may fall.

How to fix a leak in a pool

If you have a vinyl pool is likely to reach the time it causes a tear or leak. With time and use, vinyl pools can develop cracks or simply dried and broken due to constant exposure to the sun. The location and arrangement of a leak in the pool there is as difficult as it may seem. Here are some ideas on how to repair the damaged pool and keep it ready to enjoy when you want.

Instructions

1 Inspect the pool liner for signs of wear or leakage. Locate the exact area from which the filtration. You can identify a location with an escape, walking around the pool to see if there is any wet or soft spot on the lawn or in the area around the pool.

2 Look inside your pool to check for signs of cracking or settlement if the pool liner. The areas around corners or stairs are especially susceptible to cracking. To get a better idea of ​​what is happening, use a flashlight to inspect the pool liner.

3 Cut a piece of lining of a set of patches or coating waste piece so that the patch is approximately 1 to 2 larger than the tear or hole inches. Use enough to cover without being excessive. Using a too large patch prevents solidly seal the hole.

4 Sand the back of the patch with a piece of sandpaper to better adhere to the lining. Spread a layer of glue for grinding cement side of the patch, so that the adhesive covers the entire surface.

5 Place the patch over the tear and presses the lining to smooth so that there are no wrinkles or bubbles. The cement glue works both on and off the water, so no need to drain the pool. Let the patch dry.

How to heat an unheated pool

Some pool owners make the decision to implement a system of electric heating or solar energy for your pool. Although it is very beneficial for those seeking hot water, can be expensive for some. The solar covers are not as effective as a dedicated heating system, but they can provide an economical alternative for those who do not have a heated pool. Solar roofs create a vapor barrier that traps the sun's heat, which is then used to heat the pool water.

Instructions

1 Measuring the surface of a pool, and determines the shape thereof. Most pool owners already know these dimensions. Solar covers are precut in most common sizes and shapes of pools.

2 Purchase a solar cover local pool store or an online retailer. The common plastic solar cover is light blue and has a similar bubble wrap used in e appearance. Remove the solar cover of the box.

3 Place the solar cover with bubbles down into the top of the pool surface. Remove the cover each time you add chemicals and when swimmers are in the pool. The cover can stay in the pool all other times. This also helps to reduce evaporation of water.

Tips and Warnings

• The cover should be stored away when not in use to increase their shelf life.
• Solar reels are an additional option for those with large pools. This allows you to use a crank mechanism to place the cover on the pool surface and remove.

How to design a solar system to heat the pool water?

The creation of a solar pool heating at home is a popular low-cost way to heat a pool. The money you save not only on the creation of the unit itself, but by using free energy from the sun instead of electricity. There are many types of solar panels available units in order to create a solar heater. A solar panel can be easily designed for anyone with a deep knowledge of the operation of the pool.

Instructions

1 Draw a model of design in a single sheet of paper. While solar heaters pool can be all different, each has the common purpose of transferring heat from a panel that collects heat from natural sunlight to a heater next to a pool. While the panel does not have to be massive, the size should be able to store enough to heat the pool water heat. The exact size depends on the size of the pool area, and how much electricity is needed. The cooler weather is, the more heat that needs to be diverted to the heater.

2 Design a specific form for the solar panel. A panel need not be in the shape of a square as most popular panels. Plan a design circular or hexagonal trapping heat uniquely and efficiently. Removed design solar tube instead of the typical form of a flat panel. The tubes are made ​​to heat the liquid inside them and bring heat to the heater. Most of the cylindrical tubes are designed for domestic water heater, which means that use as a swimming pool heater could be simple.

3 Consider adding special features to the solar panel. The placement of the legs in the panel allows for easy use in the heat of the day when the sun's rays are strongest. The detachable legs allow the unit to be stored inside at night. The mobile units can also be stored away during the winter or when not in use. If you do not want the legs, consider installing wheels on the drive so that it can be easily transported.

4 Select a location for the panel. The fact is that the heater for a pool does not mean that the panel should be placed next to this unit. The most obvious place for a panel may be on the roof of a house or a shed. Just make sure the wires from the panel to the heater will come without problems. If the roof is chosen to be the resting place of the panel, the cables can be linked to the structure. Consider burying the wires if you have to crawl through a courtyard.

Ideas for small and unique pools

The key to building a pool is small and only keep a simple way to use the space effectively. For example, a heart-shaped pool with an area wasted space in tip which is useless for swimming or walking. Keep a basic form does not mean it has to be boring or common. You can use a variety of techniques to create a small pool with style.

Natural pool
A kidney shaped pool swimming gives a path straight and efficient and a rounded silhouette out in style . Soft outlined in this pool is better in an open area to prevent the delicate silhouette of the pool is overshadowed. Build a kidney-shaped pool in the middle of your garden using colorful stone tiles for the floor and walls. Create a Cover 2 ft (0.8 m) around the pool using the tiles. Decorative plant grass around the edges of the cover for an overgrown style. The decor and rustic stone edges of the cover, give an organic style for a look of natural pond.

Staff pool laps
The long, thin, rectangular pools are popular for swimming laps. This basic pool only needs to be as wide and deep enough to swim a person online straight. Small pools for laps are quite common. Flair incorporating location, materials and unique decorations. A small pool along the back wall of a room provides easy access for morning laps. A cream-colored stone deck with high sides and a drain keeps the water in the pool and out of the bedroom floor. A lap pool at the bottom of a garden can not be boring between colorful plants. Use blue for the floor and walls of the pool tiles, and make a small deck around with square tiles of various colors to highlight the silhouette.

Square fountain pool
A small square pool is versatile enough to use in a tight corner or in the middle of the garden. The shape of the pool gives you some place to swim, but it works best to cool off, relax, and for purposes of physical therapy. If you prefer to swim several laps, there are machines that create a strong current against which you can swim in the pool without moving. Light gray granite used to build a small square pool in a corner of your garden. Leave granite blocks 6 inches (15 cm) around a little small and flat roof. Place a low granite wall at the back of the pool and uses pipes inside the wall to make the water emerges from the top, flowing in front of the wall and drain the pool.

How To Design A Small Pool

Even in a small space, you can enjoy the benefits of having a nice pool on your property . The design of the pool will be mixed with the unique characteristics of your yard. Curves, angles, precast seating, steps, garden, terraces and the type of light are all factors that count in the design of your pool.

Instructions

1 Decide the place of your pool. How large is the area you have available? Type the dimensions that have to work. When choosing the location of your pool, keep in mind if you want to be the most important focal point or a minor point in your garden. Will it serve primarily for private enjoyment or you want to be the first impression of your house? Small pools can vary between 14 and 28 feet long and 12 feet wide and will have to determine whether a depth of 4 feet is suitable to your needs. The spa pool size can be between 7 and 9 feet. Make a chart with the possible locations of the pool and the styles and consider the pros and cons of each. Display the finished product is important and will help you see things you would not otherwise have thought.

2 Fits the shape of your pool to your garden. For example, if you have various accessories, lawn, flower beds, pots and patio, then your pool should have a free form. If you are using something geometric forms, you must also use it in the other. If your garden is formal, your pool should be too. If your garden is classic with statues, artwork and fonts your pool should be combined with all of that as possible. Mix themes design can be complicated and disharmony is usually not attractive.

3 Consider the factors of safety and fitness for use. If you have a person in the family with disabilities or small children, you may need to install railings. What type of filtration system you use? To swim and exercise, perhaps best lap pool. You'll use the above pool for fun? Then a free-form pool with integrated spa would be a good choice. Are you more interested in aesthetics? You could place a small waterfall or a river.

4 If you can afford it, hire a professional for an hour or two to help finish the design , look at your notes, advise you to choose the place and highlight all the problems you can anticipate. Your pool last long. Take your time to think carefully the best design for you and your family.

How to design a pool for a cabin

A cottage is a small building or structure temporal style tent that is adjacent to a pool. In the case of the cabins at the pools or beach resorts, they create a space for privacy. A cottage garden can function as a guest house and offer all the amenities you need swimmers to avoid entering the house. Decide how you will use your cabin before and plan a design that complements your landscape.

Instructions

1 Planning a open floor design with a bathroom and a kitchen. Kitchen equipped with a standard refrigerator, double sink and a microwave oven. Installs a single drawer dishwasher under the counter.

2 Reserve place for a closet containing a washer and dryer to clean stacking towels and robes. Place a floor with waterproof materials and is also non-slip, such as high traffic carpet or rubber floor.

3 Use glass from floor to ceiling along the side facing the pool. The sliding doors or French doors can be opened wide to make the cozy cabin. Other other options are the revolving glass doors in the center or the sliding doors that disappear into the wall.

4 Place a natural stone patio in front of the cottage which extends to the edge of the pool. Decorate the patio with pots or large terracotta pots with herbs that repel pests such as daisies or lavender.

5 Install a retractable awning over the patio or build a deck with climbing plants along it. A cover will extend the use of the patio for entertaining in inclement weather and provide protection from the sun.

6 Place an outdoor shower at one end of the cabin so that swimmers can quickly rinse water before entering the pool. Place wooden pegs fat on the outside for hanging robes and towels.

Projects Natural Pools

The natural pools allow you to enjoy the benefits of having a personal pool but without the appearance of an ordinary. Those who live in the midst of nature or those who have a backyard garden, will enjoy the appearance of the pond type natural pools . Talk to a technical professional in natural pools to discuss your ideas as well as the reviews make it to achieve the best natural pool.

Learn how to design a natural pool.

Natural pools prefabricated

The standard pools come in two main forms: oval and rectangular. Although these styles are appropriate for most patios, those seeking a unique set to relax will find the standard form of the pool is too restrictive. The natural pools are designed to look like ponds which usually stand out as having stones, trees and trails natural.

These pools allow you to enjoy the atmosphere of a personal pool without worrying about snakes, fish and bacteria. The natural pools are manufactured by professionals to look like a natural water feature in your backyard. Talk with your local swimming pool company for information about the types of pools that are available. Note that the form and the total size of a natural pool is determined by the natural shape of your back yard.

Natural Swimming Ponds

Those who have a natural pond on their property have the option to convert this element of water in a safe and secure pool. These natural pools are commonly known as pond pools. The design of the basic structure for these ponds for swimming, is to place a dividing wall between the swimming area and plant regeneration area natural to ensure its preservation. The water in these natural pools is filtered bio, which works with the filter to filter the water and creating a safe to swim in. liquid.

The bio-filter culture system using bacteria to break the natural ammonia that is produced by fermentation of waste in ponds in the regeneration zone, which is used to feed pond plants. Through this process of filtering water is able to maintain a clear and without having to perform routine maintenance, something that is different pools concrete floors and standard appearance. Besides the natural pools are able to be filtered and kept without adding harmful chemicals that can dry the skin and cause potential harm to the environment.

How to design a natural pool

A natural swimming pool, also called natural pond is a body of water that does not use chemicals or electrical equipment to disinfect water. All cleaning and maintenance is done through biological filters and plants. The pool is never empty, as with traditional. Natural ponds have been popular in Europe for some time, but now American homeowners elect to join your lifestyle green. If you're ready to go green with your pool, you need to think like a landscape when you make your plans.

Also read how to design an indoor pool.

Instructions

1. Divide your natural pool on two areas: the swimming and regeneration. The swimming area is similar to that of any pool, and regeneration is like a water garden. Each zone will have a pool lined with rubber or polystyrene. The water in the swimming area of ​​flowing waterfalls distibution. They send it through a biological filter and then pump it to the regeneration zone. The water is biologically cleaned metabolic processes in the vicinity of the regeneration zone, which is filled with the type of vegetation that will give you support. In other words, plants, algae and other impurities are eaten and then send the clean water back into the swimming area.

2. Design your new pool to look like a natural pond. You can build it with a square or rectangular shape, as many traditional pools, but most homeowners choose an irregular shape. The regeneration zone can be really swimming or other level.


3. It is of your new pool in any shade you choose. The coating comes in different colors like sky blue for a green or dark Mediterranean feeling to get the look of a mountain lake. The water in a pool is transparent, so it is important that you choose a color you like.

4. It borders both areas with rocks, gravel or any natural element you choose. Plant wildflowers and green plants to surround it. Add lilies and tropical foliage to the regeneration zone. A popular design is to add a miniature waterfall and a wooden bridge over the regeneration zone. A sandy beach is a nice touch. Some owners added a beach hut to adorn and complement the natural look.

5. Keep plants pruned around the pool, as you would in any garden. Although well some leaves falling into the water, as in any natural body of water, you better put a big net over the pool in the fall if you have many trees and shrubs in the area.

6. Plans to pay almost the same for your natural pond that a traditional pool. Depending on the landscape, could cost even more. You can also convert an inground pool in a natural.

How to design an indoor pool

Although the pools are often seen as an outdoor recreation unit, the people who live in cold areas need another option: an indoor pool. Many options are available for those wishing to design an indoor pool to enjoy all year round. To dream can become a reality by following a few basic tricks of design.

Instructions

1. Think about how you and others use the pool. Consider options that could benefit from the same space. Maybe you need a space that can be opened or may want to add an exotic waterfall. You could install the pool in a new home or add to your current residence. Anyway, these questions will help complete the design and the overall cost of future pool.

2. Plan your pool based on whether you are building a new home or extension. You can add a room to the pool in the plans if you're building a new house, but build on your current home could be more complicated. The interior ground pools are often built on the foundation of the house. The fiberglass models should be installed separately by model.

3. Consider the options if you plan to add to the pool structure exists. The most common option is to buy a unit to place on the ground. Note the ceiling height and space available, which limit the size of the pool. This should be located on the first floor or in a basement with a concrete base. This will support the weight of water. You could consider a further reinforcement of the floor below the pool to avoid structural damage.

4. Decide if an indoor / outdoor combination might be best for your home. If you put a little bored the entire indoor swimming pool, you might consider placing half the pool. Part of the pool is built in the courtyard while the rest is built inside. Rather than a wall, the pool will have a slice of fiberglass or aluminum which closes part of the pool in the winter to be only for indoor use. In other words, you can enjoy an outdoor pool in the summer and indoor in the winter.

5. Search online or through catalogs to find the right model for you. See photos showing how the pool will be indoors. Bring your ideas to a supplier or contractor pools and can help you plan more. Consider your budget as a pool is a long term investment that requires maintenance when in use. Also use electricity, which, if you use it all year, could increase your electricity bill by a good amount.

Green swim in a natural pool

Inspired by mountain lakes, the natural pool is a concept of ecological water basins that invites nature to take its place. Filtered only by plants and stones, it allows free bathing added chemicals like chlorine found in traditional residential pools.

According to Guy Gosselin, at Symbiosis of Landscape "ecological pool, incorporating quality materials and a rich mix of plants, creates a space in harmony with the environment." This helps to explain the fact that in recent years, the biological pool - also known biopiscine, Ecological, biological Basin, natural swimming pond and swimming pool living - can be found in the private courtyard of many Quebec supporters.

In addition to presenting a fresh aesthetic eye and reduce temperature variations, these natural water bodies have many advantages.

-No chemicals

Quality-of unchlorinated water

-Aesthetics, contact with wildlife

-Reduced maintenance costs

-Cool design and great build

-Resistant to Quebec winters

Operation and Maintenance

The natural pool restores life and the ecological balance of an aquatic environment. To ensure the treatment course, it is divided into three or four areas:

Central-bathing area: this is where we swam! Generally found a sand filter, a skimmer, a sedimentation chamber and a UV filter.

-Zone filtration device: shallower, this part welcomes épuratives plants involved in natural water purification.

Zone-oxygenation: here, the water passes through a vegetable belt, is aerated by different modes of circulation - falls, waterfall, etc.. - Is tempered in contact with the rollers heated by the sun, then back to the dip tank.

-Regeneration Zone (lagoon): decorated with floating plants and deeper, this part, sometimes combined with the oxygenation zone serves as a visual transition between the plant and aquatic environment.

Low maintenance, just move the draws regularly to remove leaves and clean the filters. We must also remember to prune the plants in the fall and prepare the pool for the winter by draining pipes filtration.

Swimming in the middle of wildlife

You will not be surprised to find a colorful array of fauna and flora. Insects, frogs, birds, snails and others are part of the natural ecosystem of the entire basin. You will then share your swim with this microfauna participating in pool cleaning, stirring the water and feeding on algae and insect pests such as mosquitoes. Fish should be avoided as they are generators of excrement that can facilitate the growth of algae.

Costs

The cost of a natural pool built by a professional, including the design, construction, development of the basin and aquatic plants, equivalent to that of a traditional inground pool. We must plan to spend between $ 100 and $ 150 per square foot. For self-help, the costs are lower. For cons, the realization requiring precision and attention to detail, it is important to learn and plan the project.

In all cases, the regulations on the safety of residential pools (22 July 2010) applies and do not forget to check the planning of your municipality to get the necessary permits rules.

Reminders for residential swimming pool safety

On the occasion of the 20th edition of the National Week of drowning prevention (SNPN) Lifesaving Society of Quebec reiterated his message of prevention as part of its day "Residential Swimming Pool Safety."

It should not be a hiding place: the weather is fine and warm, the number of drownings increase confirms Raynald Hawkins, CEO of SSQ.

The recent perfect Swimming tour reminded that "to succeed in swimming, it takes two ingredients: a safe design and safe environment." According Raynald Hawkins, CEO of the Lifesaving Society, it is precisely on these two fundamental elements that prevention campaign was developed.

Perfect bathing proposed including a bilingual website (www.baignadeparfaite.com) where visitors can test their knowledge by making an interactive game of 10 security vulnerabilities. The Lifesaving Society has also offered its services to the general public thanks to the perfect Swimming Tour that traveled the province to provide free courtesy home entertainment in schools and child care as well as training Prevent drowning at home.

Safe environment

Tips for a safe environment for swimming.


Before swimming:

• Learn first aid and CPR.

• Enter the address of the residence and emergency numbers near the phone.

• Bring a wireless telephone near the pool.

• Be sure to have everything you might need.

• Install a buoy, a floating object, a lifejacket or a pole near the pool.

• Establish rules for users of your pool.

While swimming:

• Assign an adult to monitor the pool.

• Never leave your kids eyes.

• Never leave a child alone in the pool if only a few seconds.

• Always be accompanied.

• Recognize the signs of drowning.

After swimming:

• Do not leave toys floating in the pool.

• Ensure that all accesses are properly closed.

Safety planning

While many parents and grandparents argue that they adequately monitor their children and grandchildren, inaccessibility to your pool remains essential to prevent serious accidents. Several drownings place while children were not supposed to swim. Toddlers often escape adult supervision, and unfortunately in many cases, they have direct access to the house or the backyard to the backyard pool. It is clear that in these Regulations on the safety of residential pools becomes important situations.

Here are the essential steps to make your security planning:

• Surround your pool on all sides by a fence at least 1.2 meters that can not be climbed and through which a spherical object 10 cm in diameter can pass.

• Have the gates of the enclosure of a device that allows them to close and lock automatically.

• If you use a ladder to access the pool (above ground pool), install a security door that closes and locks automatically.

• Make sure that neither the filtration system or any other object is close to the pool so that a child could climb to reach it.