How To Change Or Restore A Cabinet Moldings

Change or restore a cabinet moldings problem

It is not always necessary to restore or completely change the exterior of a cabinet for a different look. Sometimes, with a little ingenuity, a very simple, inexpensive and fast way, we can also achieve the goal. One way is by changing or restoring a cabinet moldings. We can change, varnishing, painting them a new color, in short, there are many alternatives that allow us to change the look of furniture without the need of much work.

On many occasions we have been dedicated to restoring old furniture, trying to remain as new, looking for a more attractive furniture for our homes. We managed, with a little skill and, above all, very little economic cost, revive those old and damaged items, achieving reuse when we thought we were destined for the trash. We have learned to restore wood step , to varnish, and many other things. Anyway, if something is true, is that for most of these jobs have needed time and shabby furniture. However, it is not always so.

We often have furniture that are not in bad shape, but nevertheless we would like to change the style in order to achieve a radical change in our rooms . From this, today I want to provide a nice alternative.

The cabinets of our rooms do not usually receive a lot of changes over the course of the years, we believe it can be a hard, almost impossible in fact to decide the style of the room based on the cabinet we have. However, placing a different color molding cabinet can significantly change its external appearance.

Thus, seeking to renew the appearance of a closet, easily, quickly and economically, we can choose a decorative moldings colocares. If already available furniture moldings, in that case we can change its color.

In the latter case, what we must do to paint the existing molding is to place masking tape around moldings, and some sort of paper on the floor to protect it from the paint.

For this work ideally, non-aqueous paint, whose characteristics allow quick drying. To use a fine paint brush.

If you do not want to paint a different color, we can varnish the trim to give brighter than the rest of the furniture.
If the closet or cabinet does not have moldings and placing desire, I will work on them first before placement. We apply a layer of primer and two of paint. Later, once dry, will place the cabinet moldings securing it with wood glue and nails tip loss.

If however, the idea is to replace the existing ones, to remove old can use a spatula to lever (of course, very carefully), or, in case you can not because they have been glued together, we can try to soften it with a heat gun.

Fix Damaged Wooden Chairs

Fix damaged wooden chairs. Wood is one of the most used material for furniture, but also one that over the years more often damaged. Especially the chairs, which are usually the first to feel the passage of time.

Fortunately there are some small ways to re-strengthen the wooden chairs to continue resisting for a while more. Let's see ...

One of the main problems is when they dance joints , ie when the joints between the legs and crossbars and end up losing loosen the adhesive. This is a problem that we must solve quickly because it is very dangerous considering that if we sat up joints can open and cause a fall.

To fix the first thing to do is remove the seat by removing the seat. Then with a rubber mallet to hit we carefully remove the legs to reach the ears of the boxes. Once done, the next step will be to remove the old adhesive with a cutter (then have to sand) and apply white glue to the box and pin . While the glue dries can fasten the seat belt with a sergeant, who set all joints at once and it will also square.

Another common problem is the damaged varnish, generally present in parts of the legs. To solve this problem the first thing is a good cleaning, which will carry out with a mixture of turpentine and petroleum oil to 50%. In this case Keep in mind that if the chair is varnished to wrist, then we can revive its luster sprinkling a few drops of oil spread move with wrist wrapped in cotton cloth shirt, slightly moistened with alcohol of 96 º.

Although factory varnishes recovered with a simple cleaning, may also be waxed very slightly. In the latter case it is best applied with a cloth or brush the wax, and then polishing with a brush for shoes wrapped in a stocking.

While wood furniture often damaged with the passage of time, this is something you can avoid if you perform good maintenance. Anyway, it's never too late, if the time has made ​​theirs in any of our wooden furniture will always have time to restore step .

How To Varnish Wooden Floors

How to varnish wooden floors. The idea to have a parquet floor is to keep it shiny and incidentally keep to give you more in time, in this posting them I will point some things related to the application of suitable coatings to withstand the traffic and how to apply if the floor is be new or used.

For this we would have to use a paint with some special features, such as a varnish with a component based on water is unique in dry quickly thus allow us to spend several hands in a day , the product usually is iniloro and ready for use.

There are two types of varnish, one polyurethane . having the characteristic of being ready for use, weak, easy to use and very odor resistant Now there are two-component products (such as DD varnish), which come with the mixture to prepare (a hardener in the varnish is incorporated), the smell is stronger, is ultra wear resistant products to clean and scratch home.

Once we have purchased the products, the polyurethane for railings and composite floor is recommended , we must ask some tools necessary to find that this work is important to have an edge sander , sandpaper (medium-coarse-grained, fine), an acuchilladora for preparation. To make the application you need to use solvent to dilute and clean, rubber gloves, wide flat brush (pallet), sand (medium grain and grain fixed).

How To Varnish Wooden Floors

The preparation is very simple, first I will show you how to do it on a parquet that has received some nno topcoat

The first is cleaning, dusting and glue residue, then apply an insecticide treatment (optional operation), a treatment for parquet or wood inside is advised. The product is dried in 24 hours and varnish allows the next day.

The manual stabbed is important to discard the top of the wood, which usually occurs not smooth and debris that may spoil the finish, so you get a clean wood with its natural tone, the varnish should only be applied on a surface of completely dry and dust-free timber. Proceed with wooden floor stabbed with acuchilladora, you must work in the same direction of the wood grain to get a better result in the application, passing the acuchilladora with a medium grit sandpaper to slash and smoothing the soil surface Wood, passed the second time with a fine grit sandpaper after that dust is cleaned and passed the vacuum in the room , angles and hard to reach places such as radiators knifed edges with sander sander or hand corners.

Now we will onto waxed old parquet

The first phase is to remove sharp objects such as nails or staples that may damage the abrasive bands sanding , cleaning is done with soap and warm water and then vigorously brushing the floor must, rinsed with clean water several times and after Dry clean dust. This cleaning is essential to remove stains and surface layers of wax and prevent abrasive belts become dirty. You can also use a product to remove wax floors if desired.

I advise wet a small area, if the wood takes on a purplish hue, it contains titanium in this case stabbing directly without applying soap. About Oak and Brown : Do not use detergent or soda product.

To complete the stabbed; happen once the acuchilladora with sandpaper grit for stripping fat and smooth, the second time with a medium grit sandpaper to slash and unify the surface of the floors, the third time is spent with acuchilladora sandpaper fine-grained, dusting and vacuuming the room.

Treatment with insecticide if necessary see galleries dug by insects or contaminated wood slats, dealing thoroughly with a product for parquet or wood interior, this product dries in 24 hours and varnish allows the next day. If any of the parquet is impaired lama is convenient to replace it with a new one making sure that is the same shade as the surrounding.

Two cases arise for the treatment of an old parquet varnishing

First film earlier this worn varnish and wood suggests, in this case you should follow the technique of preparation for new flooring. The second case is when the film is dull varnish above, in this case to proceed to a slight stabbed with fine sandpaper and apply a polyurethane varnish.

Application

To apply the veneer of a single component (ready to use), you must if you want to stain the floor before varnishing, test tone in a lama before full implementation. Drying is carried out according to the instructions of the packaging.

The coating process is carried out by the first hand, working well with flat varnish brush (pallet) facing the smoothing in the direction of the grain of the wood back to the door and back toward the window. Let it dry for several hours prior to polishing (light sanding with fine grit sandpaper and remove dust). To apply the second coat to dry and apply varnish, if outside a room where high traffic, apply a third coat. Wait 48 hours before replacing furniture in the room and not drag the furniture for a few days . It is convenient to put stickers filters on the legs of these.

In the case of two-component varnish (mixture is prepared before use), you must use a bleach cleaner before use. ancient wooden floors cleaned with soda or other products, and new soil impregnated with plaster or cement are alkaline, so we recommend using a neutralizing product (Bleach cleaner type of wood) so that the varnish applied to normally dry.

Mixing this type of varnish should be ready for immediate use, not saved, so you have to provide the amount needed for your application. The process is carried out using a wide and flat (pallet) brush, facing window, smoothing in the direction of the grain of the wood back to the door and going back to this, leaving 24 hours to dry, then sand smooth and with fine grain, dust and apply the second coat, which should dry another 24 hours.

The importance of digging the earth

This activity is almost forgotten, essential sanitation and maintenance of the garden. Generally a good dug it more beneficial to a subscriber. The two operations simultaneously dug paid more, are perfect.

A good annual dug deep winter is the best gift for our vegetables. provides sanitation, oxygen, life on earth, reducing soil insects, provided that the land retains more water for irrigation or rain. We must also dig the land of pots and planters.

Five among the easiest plants to grow in the garden

If you're a beginner (or paraisseux) in gardening, choose from thousands of plants (there are more than 5000 on the market) is a real headache. Fortunately, there are some which are easy to grow in our flowerbeds. Here are five.

Hostas

The genre offers hundreds of different cultivars. Some are dwarfs while others are huge. Between the two, there are a variety of dimensions. That is their foliage that grows hostas. This ranges from dark green to pale yellow, through variegated blue and white or yellow.

Hardy in zones 4 and 3, hostas grow in full sun or partial shade, and are well suited to all soils. They have a small "defect", they are slow to take their full swing. However, they may remain in place for several years without the need to divide. They can be used in flowerbeds, as ground cover or undergrowth.

Daylilies

There are thousands of cultivars of these plants, and therefore a choice of colors almost infinite flowers. Some cultivars have a very long flowering period. These are plants of zone 3 that fit well in all soils and like full sun, although they will tolerate light shade. They are easy to maintain known, particularly because they can remain in place ten to twelve years before being rejuvenated. Daylilies adorn the beds, creating massive and make good cut flowers.

The miscanthus Japan

These grasses zone 4, of which there are many cultivars are grown for their foliage. The latter, more or less flared tuft at the top is green, blue green or variegated, often coppery red in fall. These plants full sun, less demanding on soil quality are also decorative in their purple or silvery plumes in September. They are used alone, in hedges and flowerbeds.

Spirea Japan Gold Mound

This shrub zone 4a, hybridized in Quebec, has a rounded shape, compact (H. 70 cm L.. 80 cm). It is popular for its young shoots yellow tinged with red, and deciduous, simple, golden yellow and lime yellow. The flowers are pale pink. This plant in full sun to light shade and adapts well to all types of soil. She feeds the birds, attracts butterflies and is used in flower beds, edge, in rock gardens, low hedges or ground cover.

The vine

This native creeper zone 2a reached 10 meters high and as wide. Its stems tendrils root-spikes (which do not damage the brick) are green leaves, shiny, taking a red and purple fall color. The bluish fruit feed birds. A little slow to settle thereafter growth is very fast. Pushing both in sun and shade, undemanding on the soil type, it can cover the walls and many structures.

Close intimacy legally

They are installed for privacy, for aesthetic or because it is the law. Install a fence at the limits of his property is not as simple as you might think. First, because each municipality has its own regulations regarding the height, materials used and location. Things may also be complicated if the fence is attached, that is to say, shared with your neighbor.

Install a fence has certain obligations to the owners.

Several municipalities have regulations to force some owners to close their land. This often aims to minimize the risk of accidents or inconveniences that may result in non-fenced. Even in the absence of a settlement, if you fail to close your property and there is a source of danger, you could be held responsible in court. This is the case for example of a drowning in a pool.

Legally speaking, a municipality may not prohibit the installation of a fence by the owner. By cons, it has full power to the rest. The best thing before investing hundreds of dollars in this project is to learn about the regulations in your municipality. Of course, before erecting a fence, it is wise to locate the dividing line with the neighboring land. The intervention of a surveyor may be required if the terminals are not clearly established.

Finally, if you are a sole proprietor, it is your responsibility to pay the cost of installation, as well as the costs of maintenance. If the fence is attached, installation and maintenance costs are shared by the two parties. Failing an agreement, you can force your neighbor to help with the installation and maintenance costs. But the best way to avoid closing the baffles, it is still talking.

Water while saving water

In recent days, several regions of Quebec have higher while rainfall is scarce heat. In order to enjoy all the benefits of plants, including their ability to cool the air and provide shade, interdisciplinary Federation ornamental horticulture Quebec (FIHOQ) said that is possible water while saving water.

FIHOQ provides the general public, municipal officials and anyone interested in water conservation, the website "Water while saving water." It provides fast and efficient solutions to use the right amount of water at the right place at the right time.

Home gardeners will discover strategies to save water in the garden: What are the right tools for watering? How to install and use the barrels to collect rainwater?

According FIHOQ, the proposed measures comply with the model law for the use of potable water. This document was published by the Technical Committee on Drinking Water of the Ministry of Municipal Affairs Quebec economy Strategy.

The organization invites municipalities to create a site link "Water and save drinking water" on their web page. They will be able to relay their citizens quality information based on scientific evidence and written by experts in ornamental horticulture.

About FIHOQ

Recall that FIHOQ is the "voice" and the reference in ornamental horticulture in Quebec, both the general public and the media as among different government agencies: federal, provincial and municipal. It consists of 10 professional associations and companies, grouped into three sectors (manufacturing, marketing and services) working in ornamental horticulture.